|
Modelo AVR 645 |
| General |
| Carton
Dimensions (W x H x D) |
20.1"
x 10" x 22.2" (510mm x 254mm x 565mm) |
| Unit
Weight |
41
lb (18.6kg) |
| Unit
Dimensions |
| Shipping
Weight (System, Accessories, Packing) |
47
lb (21.4kg) |
| Power
Consumption |
120W
at Power On, idle; 1272W at rated power output (7 channels
driven) |
| Power
Requirement |
AC
120V/60Hz |
| Width |
17.3"
(440mm) |
| Height |
6.5"
(165mm) |
| Depth |
17.1"
(435mm) |
| FM
Tuner |
| Signal-to-Noise
Ratio |
Mono/Stereo
70/68dB |
| Distortion |
Mono/Stereo
0.2/0.3% |
| Usable
Sensitivity |
IHF
1.3µV/13.2dBf |
| Frequency
Range |
87.5
– 108.0MHz |
| IF
Rejection |
90dB |
| Image
Rejection |
80dB |
| Selectivity |
±400kHz,
70dB |
| Stereo
Separation |
40dB
@ 1kHz |
| AM
Tuner |
| Signal-to-Noise
Ratio |
45dB |
| Distortion |
1kHz,
50% Mod 0.8% |
| Usable
Sensitivity |
Loop
500µV |
| Frequency
Range |
520
– 1720kHz |
| Selectivity |
±10kHz,
30dB |
NOTA:
Estas especificaciones están sujetas a cambios sin previo
aviso |
| Video |
| HDMI™ |
Version
1.1 with audio processing |
| Component
Video |
10Hz
– 100MHz (–3dB) |
| Composite
and S-Video |
10Hz
– 8MHz (–3dB) |
| Video
Frequency Response |
| Input
Level/Impedance |
1Vp-p/75
ohms |
| Output
Level/Impedance |
1Vp-p/75
ohms |
| Television
Format |
NTSC |
| Audio |
| Dolby®
Pro Logic® I and II |
40dB |
|
Seven-Channel
Surround Modes, Power per Individual Channel, All Channels
Operating at Full Power |
| Surround
Channels |
75
Watts per channel @ <0.07% THD, 20Hz – 20kHz
into 8 ohms |
Surround
System Adjacent Channel Separation |
| Center
Channel |
75
Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms |
| Front
L & R Channels |
75
Watts per channel @ <0.07% THD, 20Hz – 20kHz
into 8 ohms |
| Slew
Rate |
40V/µsec |
| Transient
Intermodulation Distortion (TIM) |
Unmeasurable |
| Frequency
Response at 1W (+0dB, –3dB) |
10Hz
– 130kHz |
Signal-to-Noise
Ratio (IHF-A)
|
10Hz
– 130kHz |
| Signal-to-Noise
Ratio |
100dB |
| Input
Sensitivity/Impedance Linear (High-Level) |
200mV/47k
ohms |
| High
Instantaneous Current Capability (HCC) |
±50
Amps |
| Stereo
Mode |
90
Watts per channel, 20Hz – 20kHz, @ <0.07% THD,
both channels driven into 8 ohms |
Continuous
Average Power (FTC) per Channel |
| Dolby®
Digital |
55dB |
| DTS® |
55dB |
| Website
Feature Grid |
| Auto
Setup |
EzSet/EQ™
room equalization |
| Multizone
Capability |
Audio;
A-BUS Ready®; RS-232 serial control port; surround
back channels assignable to remote zone; ZR 10 remote |
| Analog
Inputs |
4
A/V on rear panel, 1 A/V on front panel (switchable to
output), 2 audio- only, 6-/8-channel input, tuner, The
Bridge™ Digital Media Player |
| Digital
Inputs (coaxial/optical) |
3/3
on Rear; 1 (switchable to output)/1 on front; 1 USB on
rear |
| #
of Amplifier Channels |
7 |
| Power
Rating (all channels driven at full power) |
75
x 7 @ 8 Ohms, (20Hz – 20kHz, <0.07% THD) |
| Remote
Control |
Backlit,
eight-device, programmable learning remote (2-line LCD
display) |
| On-Screen
Display |
Yes,
including component video |
regresar ....
|
